Hear From Our Clients
You know what happens when gutters fail here. Water pools around your foundation during those heavy North Fork storms. Your basement starts showing signs of moisture. The landscaping you spent money on gets washed out every time it rains hard.
The right gutter system changes that. No more water pooling around your foundation during those heavy Long Island storms. No more worrying about basement leaks when the rain hits hard. You get peace of mind knowing your foundation stays dry, your siding stays protected, and your investment stays secure.
Most Mattituck homes weren’t built with 6-inch gutters, but that’s what our weather actually demands. Standard 5-inch systems can’t keep up when we get those sudden downpours—the kind that drop half an inch in an hour. When your gutters overflow, you’re not just dealing with a mess. You’re looking at foundation damage, basement flooding, and repair bills that can hit $10,000 or more.
We size your system based on your roof area, pitch, and how water actually moves across your property. That means you’re not just getting new gutters—you’re getting a complete water management system designed for your specific property and our local conditions.
We’re licensed contractors with 10+ years solving leaks, replacing shingles, and protecting homes across the North Fork. Every crew member is properly trained, licensed, and insured for your protection.
We live here too, so our work quality reflects on us in the community. When you see our trucks around Mattituck, it’s because we’re actively working on homes like yours—dealing with the same weather, the same aging housing stock, the same challenges you’re facing.
One contractor for roof, chimney, gutters, and siding saves you time and coordination headaches. We see how everything connects. When we’re replacing your gutters, we’re also checking your fascia, inspecting your roof edge, and making sure water flows where it should. That’s the advantage of working with a full-service contractor who understands how your home’s exterior systems work together.
First, we come out to look at your current setup. We measure your roof, check the pitch, inspect your fascia boards, and figure out where water’s actually going. This isn’t a quick glance—we’re looking for rot, checking downspout placement, and determining the right capacity for your specific property.
Then we give you a clear estimate before we start, so you know exactly what you’re paying for. No surprises, no upselling once we’re on site. If your fascia needs work, we tell you upfront and explain why it matters.
On installation day, we remove your old gutters and inspect the fascia boards underneath. If there’s rot or damage, we replace those sections before installing anything new. Then we install seamless aluminum gutters custom-formed on site to fit your home’s exact measurements. We use hidden hangers every two feet for strength, seal all corners and end caps, and position downspouts to move water away from your foundation.
Before we leave, we test the system with water to make sure everything flows correctly. You see exactly how it works, and we walk you through basic maintenance so you know what to watch for.
Ready to get started?
We install 6-inch seamless gutters as standard because that’s what actually works here. The 40% increase in capacity over 5-inch systems isn’t just a number—it’s the difference between overflow and proper drainage when we get those intense storms that drop three-quarters of an inch in a short window.
Seamless construction means fewer leak points. Traditional sectional gutters have joints every 10 feet, and each joint is a potential failure point. Our seamless systems are custom-formed to your home’s measurements, reducing leak points by 80% and giving you a system that lasts 20-30 years when properly maintained.
We inspect and repair your fascia boards during every installation. Rotted fascia can’t support new gutters properly, so we replace damaged sections and reinforce weak areas before installing your new system. This isn’t an upsell—it’s what needs to happen for your gutters to actually work long-term.
Downspout placement matters more than most homeowners realize. We position them based on your property’s grade and drainage patterns, not just convenience. Water needs to move at least 6 feet away from your foundation, and we make sure that happens through proper placement and extensions.
The average gutter installation in Long Island runs between $1,200 and $4,000 depending on your home’s size and complexity. Most Mattituck homes fall in the $2,000-$2,500 range for a complete system. That investment protects you from water damage claims that average $11,605 to $14,000 when gutters fail.
If you’re seeing multiple issues—sagging sections, visible separation at the seams, rust or corrosion, or cracks—replacement usually makes more sense than patching. One or two small problems might be worth repairing, but when gutters start failing in multiple spots, you’re looking at a system that’s reached the end of its useful life.
Check your fascia boards too. If they’re soft, discolored, or showing signs of rot, your gutters have been leaking for a while. At that point, you’re not just fixing gutters—you’re preventing more expensive damage to your home’s structure.
Age matters. If your gutters are over 20 years old and showing wear, replacement gives you a fresh start with better materials and proper sizing. Most homes in Mattituck were built with undersized gutters that can’t handle our current weather patterns, so replacement is an opportunity to upgrade to a system that actually works.
Capacity. Six-inch gutters move about 40% more water than 5-inch systems, which matters significantly during Long Island’s heavy rainfall events. When you get storms dropping half an inch or more in a short period, that extra capacity prevents overflow.
Most homes built before 2000 have 5-inch gutters because that was the standard. But our weather patterns have intensified, and those older systems can’t keep up. You see the evidence every time it rains hard—water spilling over the edges, pooling around your foundation, eroding your landscaping.
The cost difference is minimal—usually a few hundred dollars for a typical home—but the performance difference is substantial. If you’re replacing gutters anyway, stepping up to 6-inch systems gives you proper protection without a significant price increase. It’s one of those upgrades that actually makes sense for our local conditions.
Most homes in Mattituck take one to two days for a complete gutter replacement. A straightforward ranch with simple rooflines might be done in a day. Larger homes or properties with multiple rooflines, dormers, or complex architecture might take two days.
We’re not rushing. The fascia inspection and any necessary repairs happen first, which can add time but prevent problems down the road. Then we remove old gutters, install new seamless sections, seal all connections, and position downspouts correctly. Each step matters for long-term performance.
Weather can affect timing. We don’t install gutters in heavy rain or high winds because proper installation requires dry conditions for sealants to cure correctly. If weather delays us, we’ll communicate that upfront and reschedule for conditions that let us do the job right.
They can, but it’s far less common than with sectional systems. Seamless gutters eliminate the joints every 10 feet that sectional gutters have, which removes the most common leak points. When seamless gutters do leak, it’s usually at corners, end caps, or downspout connections—not along the runs.
Proper installation prevents most leaks. We seal every corner and connection point, use hidden hangers for support without penetrating the gutter bottom, and make sure everything’s pitched correctly for drainage. Those details matter more than the gutters themselves.
If leaks develop later, they’re usually fixable. A failed seal at a corner or end cap can be cleaned and resealed. That’s different from sectional gutters where the joints themselves deteriorate over time and eventually need complete replacement. Seamless systems give you a longer service life with less maintenance.
New gutters won’t prevent ice dams—those form because of heat loss through your roof—but properly sized gutters reduce the damage ice dams cause. When ice builds up at your roof edge, it can push into undersized gutters and cause them to pull away from the fascia. Larger 6-inch gutters are stronger and better able to handle that stress.
Ice dams are really an insulation and ventilation problem. Heat escaping through your roof melts snow, which refreezes at the cold eaves and creates dams. That’s why you’ll sometimes see icicles hanging from gutters—it’s a symptom of what’s happening on your roof, not a gutter problem.
That said, if ice dams have damaged your current gutters—bent them, pulled them loose, or caused them to sag—replacement gives you a chance to install a stronger system. We can also add heat cable clips during installation if you know ice dams are a recurring issue on your property. But the real solution involves improving your attic insulation and ventilation.
Most homes in Mattituck run between $2,000 and $2,500 for a complete gutter replacement with 6-inch seamless aluminum gutters. Smaller homes might come in around $1,500, while larger properties with complex rooflines can reach $3,500 to $4,000.
Several factors affect the final price. Linear footage is the biggest one—more roofline means more material and labor. Fascia repairs add cost if your boards need replacement. Downspout count and placement matter too, especially if we need to extend them further from your foundation or add underground drainage.
We give you an upfront estimate that breaks down exactly what you’re paying for. No surprises once we start working. If we find additional fascia damage during removal, we’ll show you the problem and explain the cost before doing any extra work. That transparency matters when you’re making a significant investment in your home’s protection.
Local Resources
Useful Links
Other Services we provide in Mattituck
