Hear From Our Clients
You stop worrying every time it rains hard. Water flows where it’s supposed to—away from your foundation, your basement, your landscaping. No more overflow during summer storms or ice dams backing up under your shingles in winter.
Your home stops taking damage you can’t see yet. Foundation cracks don’t spread. Basement walls stay dry. Fascia boards don’t rot out from constant moisture exposure.
And you’re done climbing ladders to clear clogs or patch leaks that come back six months later. Seamless gutters mean fewer joints, less debris buildup, and systems that actually handle what Long Island throws at them. Salt air doesn’t eat through aluminum the way it does with cheaper materials. Freeze-thaw cycles don’t pull apart seams that don’t exist. You get a system designed for coastal conditions, not just the cheapest option that fails after the next nor’easter.
We’ve been handling exterior work in Stony Brook and across Long Island since the early 2000s. We’ve seen what happens when gutters aren’t built for this climate—the rust, the sagging, the constant repairs that never actually fix the problem.
We’re licensed contractors who live and work in your neighborhood. When you call about a gutter issue, we’re not sending someone who’s never dealt with salt air corrosion or doesn’t understand how coastal weather stresses roofing systems. We’ve replaced gutters on hundreds of homes within ten miles of yours.
Most of our work comes from referrals and repeat customers. That happens when you show up on time, do the work right, and don’t disappear after the check clears. If something isn’t right, we come back and make it right.
You call or submit a request. We schedule a time to come look at your home—usually within a few days, sooner if there’s storm damage. We measure your roofline, check the fascia condition, and look at how water’s currently draining around your property.
You get a written estimate that breaks down materials, labor, and timeline. We explain what we’re installing, why it works for Long Island conditions, and what warranty covers the work. No pressure, no upselling—just clear information so you can decide.
Once you’re ready to move forward, we schedule installation. Most gutter replacement jobs take one to two days depending on your home’s size. We fabricate seamless aluminum gutters on-site to match your exact measurements. Old gutters come down, fascia gets inspected and repaired if needed, new gutters and downspouts go up with proper pitch and secure mounting.
We test the system, clean up completely, and walk you through what we did. You’ll know how to maintain your new gutters and when to call if anything seems off. Then we’re done—and you’ve got our number if you need us down the road.
Ready to get started?
Complete removal of your old gutters and disposal—you don’t deal with any of it. We inspect your fascia boards while the old system is down because rotted wood won’t hold new gutters properly. If we find damage, we’ll let you know what needs repair before new gutters go up.
Seamless aluminum gutters custom-cut to your home’s measurements. These resist the salt air that corrodes other materials within a few years here on Long Island. Aluminum doesn’t rust, handles temperature swings without cracking, and holds up under snow loads that would bend vinyl systems.
Downspouts positioned to move water away from your foundation, not just dump it next to your basement wall. We add extensions where needed and make sure drainage slopes away from the house. Proper water management matters more than most homeowners realize until they’re dealing with foundation issues or flooded basements.
Stony Brook gets 40-50 inches of rain annually plus heavy snow. Your gutters need to handle sudden summer downpours and winter ice without failing. We install systems built for that reality, with secure mounting that won’t sag or pull away during the next big storm.
Most residential gutter replacement jobs take one to two days from start to finish. The timeline depends on your home’s size, how many stories, and whether we find fascia damage that needs repair before new gutters go up.
Single-story homes under 2,000 square feet usually get done in a day. Two-story homes or properties with complex rooflines might take two days. We’re not rushing through the work—proper installation means setting the right pitch so water flows toward downspouts, securing brackets correctly so gutters don’t sag under snow loads, and making sure every joint is sealed.
If we’re replacing gutters after storm damage and you need it done fast, we prioritize emergency work and can often start within 24-48 hours. But we won’t cut corners to finish faster. Bad installation causes the same problems you’re trying to fix.
Sectional gutters come in pieces that connect together, which means seams every ten feet or so. Those seams are where leaks start, especially with freeze-thaw cycles and salt air working on the joints. Over time, the sealant breaks down, sections separate slightly, and water finds its way through.
Seamless gutters get fabricated on-site in one continuous piece for each run of your roofline. No seams means no weak points where leaks develop. Debris doesn’t catch and build up at joints. Water flows more efficiently because there’s nothing interrupting the path to your downspouts.
For coastal areas like Stony Brook, seamless makes even more sense. Salt air accelerates corrosion at any connection point. The fewer connections you have, the longer your system lasts. Most seamless aluminum gutter installations last 20+ years here when installed correctly. Sectional systems start having problems within 5-10 years and need constant maintenance.
Full gutter replacement for most Stony Brook homes runs between $1,200 and $2,500, depending on your home’s size and the linear footage of gutters needed. That includes removal of old gutters, new seamless aluminum installation, downspouts, and proper drainage setup.
Per linear foot, you’re looking at $6 to $25 for materials and labor combined. The range depends on gutter size (5-inch or 6-inch), fascia condition, and how many corners and downspouts your roofline requires. Two-story homes cost more because of the additional labor and equipment needed to work safely at height.
We provide written estimates that break down exactly what you’re paying for—no surprise charges after the work is done. If we find fascia damage during removal that needs repair, we’ll discuss it with you before proceeding. Some companies lowball the estimate then add costs once they’re halfway through the job. We don’t operate that way.
Yes, but only if they’re installed correctly and sized properly for your roof’s square footage. Gutters exist to move water away from your home’s foundation. When they fail—overflowing, leaking, or dumping water right next to the house—that water finds its way into your basement or saturates the soil around your foundation.
Foundation repairs average $4,000 to $12,000 depending on severity. Basement waterproofing runs $2,000 to $6,000. Both problems often start with failed gutters that homeowners didn’t realize were causing damage until it was expensive to fix.
Proper gutter replacement means water gets directed at least 4-6 feet away from your foundation through downspout extensions. The gutters themselves need correct pitch so water doesn’t pool and overflow during heavy rain. And the system has to handle Long Island’s rainfall volume—we get storms that dump 2-3 inches in an hour during summer. Undersized gutters or improper installation won’t protect your home when you actually need them to.
Clean them out twice a year—once in late spring after trees finish dropping seeds and debris, once in late fall after leaves come down. That’s it for most Stony Brook homes. Seamless gutters don’t need the constant attention that sectional systems require because there aren’t seams to reseal or joints to tighten.
Check downspouts during heavy rain to make sure water’s flowing freely. If you notice overflow, there might be a clog that needs clearing. Look for any sagging between mounting brackets, though this rarely happens with proper installation.
Aluminum doesn’t rust, so you’re not dealing with corrosion issues like you would with steel gutters. Salt air doesn’t damage it the way it does other materials. You might see some discoloration over time, but that doesn’t affect function. If you want to keep them looking clean, a simple rinse with a garden hose once or twice a year works fine. The main thing is keeping debris from building up and blocking water flow.
We can replace gutters year-round as long as temperatures stay above freezing during installation. The sealants and materials we use need above-freezing conditions to set properly. Most winter days in Stony Brook hit that threshold, so installation is usually possible.
Ice dams and winter storm damage actually create a lot of emergency gutter work. If your gutters fail during winter and water’s backing up under your shingles or ice is pulling sections away from your fascia, waiting until spring means months of ongoing damage. We prioritize emergency repairs and can often start work within a day or two.
The main limitation is safety. If there’s ice on your roof or conditions are dangerous for working at height, we’ll wait for a safer weather window. But most winter gutter replacement happens without issues. We’re not going to risk our crew’s safety or do substandard work because conditions aren’t ideal—but we also won’t make you wait four months if your gutters are actively damaging your home.
Local Resources
Useful Links
Other Services we provide in Stony Brook
