Hear From Our Clients
You stop worrying about carbon monoxide leaks. You stop budgeting for another round of repairs that only last a few years. You get a chimney system built with marine-grade materials that handle what Long Island throws at it—salt air, ice dams, wind-driven rain, and everything in between.
Most chimneys around here need attention every 5 to 10 years. Repointing turns into flashing work. Flashing work turns into liner replacement. At some point, you’re not fixing a chimney anymore—you’re keeping a failing system on life support.
Replacement gives you a clean slate. New masonry. New liner. New flashing. New cap. Everything sealed, structurally sound, and built to last in conditions that break down standard materials faster than most homeowners expect. You’re not just solving today’s problem—you’re eliminating the next five years of them.
We’ve spent over a decade working on Suffolk County homes. We’ve seen what happens when chimneys aren’t built for coastal conditions—cracked crowns, corroded liners, water damage that spreads into attics and walls.
We’re licensed, insured, and based right here on Long Island. Our crews live in the same weather you do. They know how freeze-thaw cycles crack mortar joints and how salt air eats through standard flashing. That’s why we use materials designed for this environment, not the cheapest option that passes inspection.
You’ll get a clear estimate before we start. No surprises halfway through the job. No pressure to upsell. Just honest assessment and work that reflects on us in the community we live in.
We start with an inspection—not a sales pitch. We’re looking at your chimney’s structure, liner condition, flashing, and any water damage that’s already happened. If replacement makes sense, we’ll explain why and what it costs. Most full replacements run between $10,000 and $15,000 depending on height and complexity.
Once you’re ready to move forward, we schedule the work around weather and your availability. We remove the old chimney from the roofline up (or from the foundation if it’s a full teardown). Then we rebuild with materials rated for coastal exposure—brick or stone that won’t spall in freeze-thaw cycles, stainless steel liners that resist corrosion, and flashing that actually keeps water out.
The job typically takes several days depending on size. We protect your roof, clean up daily, and make sure everything is sealed before we leave. You’ll have a chimney that works the way it should—safely venting gases, keeping water out, and holding up to Long Island weather without constant maintenance.
Ready to get started?
A complete chimney replacement means tearing out the compromised structure and rebuilding it correctly. That includes removing old masonry, damaged liners, and failed flashing. We rebuild from the roofline up with new brick or stone, install a new stainless steel liner sized for your heating system, and seal everything with marine-grade flashing that handles Long Island’s weather.
We also install a new chimney cap to keep water, animals, and debris out. If your chimney stack has structural issues below the roofline, we can handle that too—either with a partial rebuild or a complete removal and reinstall of the entire system.
Melville homes face the same coastal conditions as the rest of Long Island—salt air that corrodes metal components, moisture that seeps into masonry, and freeze-thaw cycles that crack even well-built chimneys over time. Standard materials fail faster here. That’s why we use components designed for marine environments, not just what meets minimum code. You’re paying for materials that last and crews who know how to install them in conditions that accelerate normal wear.
Most complete chimney replacements in Melville run between $10,000 and $15,000. Height is the biggest cost factor—taller chimneys require more materials, more labor, and more safety equipment. Complexity matters too. If we’re removing an old chimney and rebuilding from the foundation, that costs more than a roofline-up replacement.
You’ll also pay more for marine-grade materials, but that’s not padding the bill—it’s using components that actually hold up to salt air and freeze-thaw cycles. Standard flashing and liners corrode faster on Long Island. Spending more upfront means you’re not replacing things again in five years.
We give you a clear estimate after inspecting your chimney. No hidden costs. No surprises halfway through the job. You’ll know what you’re paying for before we start.
If you’re repairing your chimney every few years, replacement makes more financial sense. Repointing, flashing repairs, and liner work add up fast. When the structure itself is compromised—cracked masonry, a failing liner, or water damage that’s spread into your home—you’re better off replacing than patching.
Visible cracks in the chimney stack, water stains on interior walls near the chimney, or a liner that’s corroded through are all signs the system is failing. You can keep repairing individual components, but you’re spending money on a structure that’s going to keep breaking down.
Replacement gives you a fresh start. New materials. New liner. New flashing. Everything built to handle Long Island’s weather without the constant maintenance cycle. If your chimney is more than 30 years old and you’re facing another major repair, it’s worth getting an honest assessment about whether replacement is the smarter move.
We use marine-grade materials designed for salt air and moisture exposure. That means stainless steel liners instead of aluminum, which corrodes faster in coastal environments. Flashing is either copper or heavy-gauge stainless—not the thin aluminum that fails in a few years.
For masonry, we use brick and mortar rated for freeze-thaw cycles. Long Island winters crack standard masonry when water gets in, freezes, and expands. We also seal everything with waterproofing designed for coastal exposure, not just basic sealant that breaks down in a few seasons.
Chimney caps are stainless steel with mesh that keeps animals and debris out while allowing proper ventilation. Standard caps rust through quickly near the ocean. Marine-grade components cost more, but they last longer in conditions that destroy cheaper materials. You’re not paying extra for the same thing—you’re getting materials that actually hold up to the environment they’re installed in.
Most chimney replacements take three to five days depending on height and complexity. We’re tearing out old masonry, rebuilding the structure, installing a new liner, and sealing everything properly. That’s not work you rush.
Weather affects the timeline. We can’t pour mortar in freezing temperatures or during heavy rain. If we hit bad weather mid-job, we’ll protect your roof and pause until conditions improve. Pushing through in bad weather leads to problems down the road—mortar that doesn’t cure properly, flashing that doesn’t seal, and leaks that show up the first time it rains.
We’ll give you a realistic timeline when we estimate the job. If something changes—weather delays, unexpected damage we find during teardown—we’ll let you know immediately. You won’t be left guessing when we’re coming back or how much longer the job will take.
It depends on why your chimney failed. If it’s storm damage—lightning strike, falling tree, or severe weather that caused sudden structural failure—your homeowners insurance might cover it. If it’s wear and tear, age, or deferred maintenance, probably not. Insurance covers sudden damage, not gradual deterioration.
You’ll need documentation. Photos of the damage, an inspection report explaining what failed and why, and an estimate for replacement. Some insurance companies will send their own adjuster to verify the claim. If they determine the damage was preventable or due to lack of maintenance, they’ll deny the claim.
If you’re filing a claim, get the inspection done quickly. Insurance companies want to see damage documented right after it happens, not months later. We can provide a detailed report that explains what failed and whether it’s related to a covered event. Even if insurance doesn’t cover the full replacement, they might cover part of it if storm damage contributed to the failure.
We can do partial replacements if the damage is isolated to one section. If your chimney stack above the roofline is cracked but the structure below is solid, we’ll remove and rebuild just the damaged portion. Same with chimney caps, flashing, or liners—if the masonry is sound, we can replace individual components.
But if the damage goes deeper—cracks below the roofline, structural settling, or a liner that’s failed and caused interior damage—partial replacement doesn’t solve the problem. You’ll spend money fixing the visible part while the underlying issue keeps getting worse.
We’ll tell you honestly what makes sense after inspecting the whole system. If a partial rebuild works, we’ll explain what we’re replacing and what we’re leaving. If the chimney needs to come down completely, we’ll explain why and what it costs. You’re not getting upsold on work you don’t need—you’re getting an honest assessment from someone who’s seen what happens when you try to patch a failing structure.
Local Resources
Useful Links
Other Services we provide in Melville
