Hear From Our Clients
You get a chimney that actually keeps water out. No more stains creeping down your walls when it rains. No more worrying whether that crack you’ve been ignoring is going to cost you thousands next winter.
Most chimney problems in Coram start small—a little gap in the flashing, some crumbling mortar between bricks. Then Long Island’s freeze-thaw cycles get to work. Water seeps in, freezes, expands, and turns a $400 repair into a $4,000 rebuild.
We handle chimney masonry repair, chimney flashing repair, crown work, waterproofing, and liner replacement. The goal isn’t just to patch things up. It’s to stop the cycle of damage so you’re not calling us back out here in six months.
We’ve been working on Long Island homes long enough to know exactly how salt air and winter weather tear chimneys apart. Most homes in Coram were built in the 1980s, which means most chimneys are pushing 40 years old and showing it.
We’re licensed, insured, and we don’t disappear after the job’s done. When we say something’s covered, it’s covered. When we give you a timeline, we stick to it.
You’re not hiring a national chain that subcontracts the work out. You’re hiring people who live here, work here, and understand what your chimney’s up against every winter.
First, we inspect the entire chimney—not just the part you called about. We check the crown, the flashing, the mortar joints, the liner, and the cap. If there’s hidden damage, you’ll know about it before we start.
Then we give you a written estimate that breaks down what needs to happen and why. No surprises, no upselling, no pressure. If something can wait, we’ll tell you. If it can’t, we’ll explain why.
Once you approve the work, we schedule it fast. Most repairs take one to three days depending on the scope. We protect your property, do the work, clean up, and walk you through what we did before we leave. You’ll know exactly what got fixed and what to keep an eye on going forward.
Ready to get started?
Chimney flashing repair is one of the most common jobs we do in Coram. Flashing is the metal seal between your chimney and roof, and when it fails, water pours straight into your home. We remove the old flashing, install new corrosion-resistant material, and seal it properly so it holds up against Long Island’s weather.
Masonry work covers cracked bricks, crumbling mortar joints, and spalling caused by freeze-thaw damage. We match the mortar to your existing chimney and rebuild sections that are too far gone to patch. If your chimney crown is cracked—that’s the concrete cap on top—we’ll repair or replace it to stop water from getting inside the flue.
Chimney caps and dampers keep animals out and stop rain from pouring down the flue. If yours is rusted or missing, we’ll install a new one. And if your liner is cracked or deteriorating, we’ll reline it so smoke and carbon monoxide vent safely out of your home instead of leaking into your living space.
It depends on what’s broken. Minor mortar repairs or flashing work usually run between $400 and $1,200. If you need a full crown rebuild, liner replacement, or extensive masonry work, you’re looking at $2,000 to $5,000 or more.
The biggest factor is how long the problem’s been ignored. A small crack that gets caught early might cost $500 to fix. That same crack after two winters of freeze-thaw damage could mean rebuilding half the chimney.
We give free estimates, and we break down exactly what you’re paying for. No hidden fees, no vague line items. You’ll know what the job costs before we touch anything.
If you see water stains on the walls or ceiling near your chimney, that’s a repair issue, not a cleaning issue. Same goes for white staining on the bricks (that’s efflorescence, which means water’s getting in), pieces of brick or mortar in your fireplace, or a rusty damper.
Cleaning is about removing creosote buildup inside the flue so you don’t have a chimney fire. Repair is about fixing structural damage, leaks, or safety hazards. Sometimes you need both.
The only way to know for sure is to have someone inspect it. We check the whole system—inside and out—and tell you what’s urgent, what can wait, and what’s fine as-is.
Coastal weather is brutal on chimneys. Salt air accelerates corrosion on metal components like flashing, caps, and dampers. It also breaks down mortar faster than you’d see inland.
Then there’s the freeze-thaw cycle. Water gets into small cracks, freezes overnight, expands, and makes the crack bigger. This happens over and over all winter. Most homes in Coram were built in the 1980s, so the chimneys are old enough that this cycle has done serious damage.
Add in the fact that Long Island gets hit with nor’easters that drive rain sideways into chimneys, and you’ve got a perfect storm for accelerated wear. It’s not that chimneys here are built worse—they just face tougher conditions.
If water’s actively leaking into your home, don’t wait. Every time it rains, you’re getting more water damage inside your walls and ceilings. That leads to mold, rot, and structural problems that cost way more to fix than the chimney itself.
If you’re seeing cracks, loose bricks, or damaged flashing but no active leaks yet, spring is actually the best time to schedule the work. The weather’s more predictable, materials cure properly, and you’re getting ahead of next winter instead of reacting to it.
That said, if a storm knocks your cap off or you notice a strong smell coming from your fireplace, get it looked at right away. Some problems don’t wait well, and we’re available for emergency repairs when you need us.
Water damage gets worse, not better. A small flashing leak turns into rotted roof decking. Cracked mortar joints let more water in, which causes more freeze-thaw damage, which creates bigger cracks. It’s a cycle that speeds up every year you ignore it.
Inside your home, you might see water stains, peeling paint, or mold growth. Outside, bricks start spalling (flaking apart), and eventually sections of the chimney become unstable. In extreme cases, chimneys can partially collapse.
There’s also the safety issue. A cracked liner or damaged flue can let carbon monoxide leak into your home. Creosote buildup in a damaged chimney increases your risk of a chimney fire. These aren’t just cosmetic problems—they’re hazards.
Yes. Our labor is guaranteed, and the materials we use come with manufacturer warranties that range from 10 to 30 years depending on what’s being installed. We’ll give you the specific warranty details in writing before we start the job.
If something fails because of our workmanship, we come back and make it right. If a product fails within its warranty period, we handle the claim and replacement. You’re not stuck dealing with manufacturers or fighting over coverage.
The key is hiring someone who’s going to be around to honor that warranty. We’ve been serving Long Island homeowners for years, and we’re not going anywhere. When we say it’s covered, it’s covered.
Local Resources
Useful Links
Other Services we provide in Coram
