Hear From Our Clients
Your ceiling stays dry during storms. That’s the baseline, and it’s non-negotiable.
Beyond that, you’ll notice the difference in your monthly electric bill. Modern Velux skylights are up to 35% more energy efficient than older units, which matters when Suffolk County electricity rates hit $0.27 per kilowatt-hour—34% higher than the national average. Most Ridge homeowners pay between $301 and $611 monthly for electricity. Cutting even 10-15% off that adds up fast.
You also get more natural light without the glare or heat issues that came with your old skylight. New units are designed to manage Suffolk County’s temperature swings, from summer heat to winter freeze-thaw cycles that crack seals and warp frames. The glass stays clear. The frame stays tight. And you’re not calling someone back six months later because water’s dripping onto your floor again.
Home Team Construction has handled roof skylight replacement across Ridge, Brookhaven, and the surrounding Suffolk County area for more than 10 years. We’re licensed, insured, and we’ve seen what happens when skylights aren’t installed correctly—because we’re often the ones called in to fix them.
Most skylight leaks aren’t caused by the skylight itself. They’re caused by improper flashing installation. That’s where experience with Long Island weather matters. Ice dams, freeze-thaw cycles, coastal humidity—these aren’t just talking points. They’re conditions that destroy shortcuts and expose bad work.
We install Velux skylights with integrated flashing systems, and we back the work with a leak-free guarantee. Not a vague promise—a real warranty you can point to if something goes wrong.
We start with a free inspection. You show us the skylight, we assess the frame, flashing, and surrounding roof structure. If the unit is over 15 years old, replacement usually makes more sense than repair—seals fail, hardware corrodes, and glass coatings degrade. We’ll tell you what we find and give you upfront pricing. No hidden fees.
Once you approve the work, we schedule the installation. Most single skylight replacements take four to six hours and get finished the same day. We remove the old unit, inspect and repair any roof deck damage, install new flashing that integrates with your roofline, and set the new Velux skylight. Everything gets sealed properly for Suffolk County weather—not just for today’s forecast, but for the next 20 to 30 years.
After installation, we walk you through the warranty coverage. Velux provides up to a 10-year materials warranty, and our installation is backed by our own workmanship guarantee. You’ll know exactly what’s covered and how to reach us if you ever need anything.
Ready to get started?
You’re getting a complete removal and replacement, not a patch job. That means pulling out the old skylight, flashing, and any damaged materials around the opening. We inspect the roof deck for rot or structural issues—common in Ridge homes where leaks have gone unnoticed for months or years.
The new Velux skylight comes with energy-efficient Low-E glass that blocks UV rays and reduces heat transfer. If you want ventilation, we install operable units that let humid air escape naturally, which helps with mold and mildew problems common in Long Island homes. If you just want light, fixed units work fine and cost less.
Flashing is where most contractors fail, so that’s where we spend the most time. Velux’s integrated flashing system is designed to work with their skylights specifically, and it’s built to handle the freeze-thaw cycles that crack generic flashing. We also make sure the surrounding shingles are properly sealed and that water channels away from the skylight opening.
Suffolk County’s average electricity cost is $3,612 per year. An energy-efficient skylight replacement typically costs between $1,500 and $2,500 depending on size and features. That means the investment pays for itself in 8 to 10 years through energy savings alone—and that’s before you factor in the avoided cost of water damage repairs, which can run into the thousands if left unchecked.
Most residential skylight replacements in Ridge run between $1,500 and $2,500. That includes removing your old skylight, installing a new Velux unit with integrated flashing, and sealing everything properly for Suffolk County weather.
The range depends on skylight size, whether you want a fixed or vented unit, and if there’s any roof deck damage that needs repair. Larger skylights or units with advanced features like solar-powered blinds or rain sensors cost more. If we find rot or structural issues during removal, that adds to the total—but we’ll tell you about it before we proceed, not after.
Financing options are available for qualified homeowners, and we provide upfront pricing during the free inspection. No surprises, no hidden fees. You’ll know what you’re paying before we start work.
Most single skylight replacements take four to six hours and get completed the same day. We’re not tearing apart your entire roof—just removing the old unit, prepping the opening, and installing the new skylight with proper flashing.
Weather can affect the timeline. If it’s raining or snowing, we’ll reschedule rather than risk water getting into your home during the swap. Once we start, the opening is only exposed for a short window, and we tarp and protect the area if conditions change.
If you’re replacing multiple skylights or if we discover roof deck damage that needs repair, the job takes longer. We’ll give you a realistic timeframe during the inspection so you can plan accordingly.
If it’s installed correctly, yes. Most skylight leaks come from improper flashing installation, not from the skylight itself. That’s why we use Velux’s integrated flashing system—it’s designed to work with their skylights and handle Suffolk County’s freeze-thaw cycles without cracking or separating.
We also back the installation with a leak-free guarantee. If water gets through because of our workmanship, we come back and fix it at no cost to you. The Velux skylight itself is covered by the manufacturer’s warranty, which runs up to 10 years depending on the model.
Older skylights—especially those over 15 years old—usually need full replacement rather than repair. Seals fail, hardware corrodes, and the glass coating degrades. Trying to patch an old unit is like putting a bandage on a broken bone. It might hold for a while, but it’s not a real solution.
If your skylight is over 15 years old, replacement almost always makes more sense. Seals break down, frames warp from temperature swings, and the glass coating that blocks UV and reduces heat transfer wears out. Repairing one component doesn’t fix the others, and you’ll end up paying for multiple service calls instead of solving the problem once.
If the skylight is newer and the issue is isolated—like a cracked pane of glass or a single piece of damaged flashing—repair might be an option. We’ll assess the unit during the free inspection and tell you honestly whether repair or replacement is the better move.
Three out of four skylight leaks result from the skylight unit itself failing, not just the flashing. That’s why most contractors who only fix the flashing don’t actually solve the problem. If the skylight is old, you’re better off replacing the whole thing and getting a warranty that covers both the product and the installation.
Velux skylights cost more upfront, but they’re built to last 20 to 30 years with minimal maintenance. The integrated flashing system is designed to work specifically with their units, which matters in Suffolk County where freeze-thaw cycles destroy generic flashing that doesn’t flex and seal properly.
You also get better energy efficiency. Velux units with Low-E glass can be up to 35% more efficient than older skylights, which translates to real savings when Ridge electricity rates are 34% higher than the national average. Cutting $10 to $15 per month off your electric bill adds up to $3,600 to $5,400 over the skylight’s lifespan.
The warranty is another factor. Velux offers up to 10 years of materials coverage, and because we’re an authorized installer, you get full manufacturer support if anything goes wrong. Cheaper brands often have shorter warranties and limited service networks, which means you’re on your own if something fails. When you’re cutting a hole in your roof, that’s not a risk worth taking.
You can technically install a skylight yourself, but it’s not a project where mistakes are cheap to fix. You’re cutting into your roof, which means one wrong measurement or improperly sealed flashing leads to leaks, water damage, and potential mold problems that cost thousands to remediate.
Flashing installation is the hardest part and the most common failure point. It has to integrate with your existing roofline, account for water flow patterns, and flex with Suffolk County’s temperature swings without cracking. That takes experience with Long Island weather conditions, not just following a YouTube tutorial.
Professional installation also comes with warranties. If we install your skylight and it leaks because of our work, we fix it at no cost. If you install it yourself and something goes wrong, you’re paying for both the repair and the original materials you already bought. Most homeowners find that the cost of professional installation is worth the peace of mind and the guarantee that it’s done right the first time.
Local Resources
Useful Links
Other Services we provide in Ridge
