Hear From Our Clients
You’ve probably noticed the water stains near your fireplace. Maybe you’ve already paid for repairs that didn’t last through the season. That’s because most chimney problems in Ridge aren’t fixable with another patch job—they’re structural, and they’re getting worse every time temperatures drop below freezing.
When water gets into cracks and freezes, it expands by nine percent. That pressure breaks apart bricks, widens mortar joints, and damages your chimney crown from the inside out. Add Long Island’s salt air, and you’re dealing with corrosion that eats through flashing and metal components faster than anywhere inland.
A full chimney replacement stops the cycle. You’re not just covering up damage—you’re rebuilding with materials designed for coastal conditions. That means marine-grade flashing, properly sealed chimney caps, and liners that won’t crack when the next nor’easter rolls through. You get a system that works with Long Island weather instead of fighting it, and you stop throwing money at repairs that only buy you a few months.
We’ve spent more than ten years replacing chimneys across Ridge, Brookhaven, and the rest of Suffolk County. We’re licensed, insured, and we live here—which means we understand exactly what salt air and freeze-thaw cycles do to chimneys over time.
We don’t upsell repairs when you need replacement, and we don’t disappear after the job. Our crews are trained on Long Island building codes, and every chimney replacement comes with clear pricing before we start. You know what you’re paying, what you’re getting, and how long it’ll take.
When you’re looking at a $10,000 to $15,000 investment in your home, you want someone who’s done this hundreds of times and knows how to handle coastal weather conditions. That’s what we do, and we’ve built our reputation on it.
We start with an inspection to see what’s salvageable and what needs replacing. Most Ridge homeowners need a complete rebuild—chimney stack replacement, new flashing, chimney liner replacement, and a properly sealed chimney cap. We’ll tell you exactly what’s required and why, with pricing that doesn’t change once we start.
Demo comes next. We remove the damaged chimney down to the roofline or foundation, depending on how far the deterioration goes. Then we rebuild using materials rated for Long Island’s coastal environment—bricks that resist salt-air corrosion, stainless steel liners, and flashing that won’t rust out in three years.
The rebuild includes proper waterproofing at every layer. We’re not just stacking bricks—we’re sealing joints, installing a chimney crown that sheds water, and making sure your new chimney flue replacement is sized correctly for your heating system. Once it’s done, you get a system that handles winter storms, summer humidity, and everything in between without leaking or cracking.
Ready to get started?
A complete chimney replacement in Ridge covers everything from the roofline up—and sometimes below it, if your foundation has shifted. That includes tearing out the old chimney stack, replacing damaged flashing around the roofline, installing a new stainless steel or clay tile liner, and building a properly sealed chimney crown and cap.
We use materials designed for Suffolk County’s conditions. Marine-grade flashing resists salt-air corrosion. Chimney caps with mesh screens keep out rain, animals, and debris while letting smoke vent properly. Liners are sized to match your heating system so you’re not dealing with draft problems or carbon monoxide risks.
You also get transparency. We’ll show you what’s damaged, explain why it can’t be repaired, and walk you through the replacement process before we touch anything. Most jobs take three to five days depending on chimney height and weather, and we handle permits and inspections so you don’t have to track down Suffolk County building codes yourself.
This isn’t a cosmetic fix. You’re rebuilding a critical part of your home’s heating and ventilation system, and in Ridge—where the average home is over fifty years old—that means dealing with outdated construction methods and materials that weren’t built for Long Island’s freeze-thaw cycles and coastal storms.
Most complete chimney replacements in Ridge run between $10,000 and $15,000, depending on chimney height, accessibility, and how much structural damage we’re dealing with. If your chimney is three stories tall or requires foundation work, expect costs on the higher end. If it’s a single-story ranch with straightforward access, you’ll land closer to $10,000.
Long Island costs run higher than national averages because of stricter building codes and higher labor costs in Suffolk County. But that also means you’re getting work that’s done right—properly permitted, inspected, and built to handle coastal conditions.
We give you a fixed price after the inspection. That number includes demo, materials, labor, permits, and cleanup. If we find additional damage once we open things up, we’ll talk to you before doing anything extra. You won’t get surprise charges at the end.
Most chimney replacements in Ridge take three to five days from start to finish. Day one is demo—tearing out the old chimney and prepping the work area. Days two through four are the rebuild, which includes installing new flashing, laying bricks or stone, setting the liner, and building the crown and cap.
Weather can slow things down. If we’re dealing with rain or high winds, we’ll pause rather than risk water getting into your home or compromising the mortar. Spring and fall are the best windows for chimney work on Long Island because you avoid summer humidity and winter freezes that affect curing times.
We’ll give you a timeline before we start, and we’ll keep you updated if anything changes. Most homeowners are surprised how fast it goes once we’re on site—but the key is doing it right, not doing it fast.
It depends on what’s damaged and how far the deterioration has spread. If you’ve got a few cracked bricks near the top or damaged flashing that’s letting water in, repairs might be enough. But if the mortar joints are crumbling, the chimney is leaning, or you’re seeing water stains inside your home, you’re usually looking at replacement.
Ridge homeowners often try to patch things for a season or two, but freeze-thaw cycles and salt air make the damage worse every year. Repairs buy you time—replacement solves the problem. If the chimney structure is compromised, patching it is just delaying the inevitable and potentially creating safety risks.
We’ll tell you honestly whether repair or replacement makes sense. If you can get another five to ten years out of a repair, we’ll say so. But if the foundation is failing or the chimney stack is unstable, replacement is the only option that protects your home and your family.
Salt air and freeze-thaw cycles are the main culprits. Long Island sits right in the path of coastal storms, and salt particles penetrate bricks and mortar joints, causing corrosion from the inside out. That’s why metal flashing rusts faster here and why brick faces start flaking after a decade or two.
Freeze-thaw damage happens every winter. Water seeps into tiny cracks, freezes when temperatures drop, and expands by nine percent. That expansion breaks apart mortar, widens cracks, and damages chimney crowns. When spring comes and everything thaws, more water gets in—and the cycle repeats, making the damage worse each year.
Ridge is in Suffolk County, where the average home is over fifty years old. Most of those homes have original chimneys that weren’t built with marine-grade materials or proper waterproofing. They were fine for the first twenty years, but now they’re deteriorating faster than chimneys inland because of the coastal environment. That’s not a construction defect—it’s just what happens when you’re this close to the Atlantic.
Yes. If your chimney was damaged by a storm, we can work with your insurance company to document the damage and provide the estimates they need. Most homeowners insurance policies cover sudden damage from events like high winds, falling trees, or lightning strikes—but they won’t cover general wear and tear or deterioration from age.
We’ll take photos, write up a detailed scope of work, and explain what’s storm damage versus what’s pre-existing. Insurance adjusters in Suffolk County see a lot of chimney claims, so having clear documentation helps move things along. We’ve worked with most of the major carriers, and we know what they’re looking for.
Even if insurance doesn’t cover the full replacement, knowing what’s covered and what’s not helps you plan. We’ll give you a breakdown so you can decide whether to file a claim or handle it out of pocket. Either way, you’re getting the same quality work and the same upfront pricing.
Chimney liner replacement means we’re only swapping out the flue liner inside your existing chimney structure. That’s the metal or clay tile tube that vents smoke and gases from your fireplace or heating system. If your chimney stack and brickwork are solid but the liner is cracked or corroded, liner replacement might be all you need.
Full chimney replacement means tearing out everything—bricks, mortar, flashing, crown, cap, and liner—and rebuilding from scratch. You’d need this if the chimney structure itself is failing: leaning, crumbling mortar joints, water damage throughout, or a compromised foundation.
In Ridge, we see more full replacements than liner-only jobs because of how salt air and freeze-thaw cycles affect the entire structure. Once the bricks and mortar start failing, replacing just the liner doesn’t solve the underlying problem. We’ll inspect your chimney and tell you which option makes sense based on what’s actually damaged—not what’s easiest to sell.
Local Resources
Useful Links
Other Services we provide in Ridge
